Product Description:
Advantages and features of Aventics solenoid valve coils
Low power consumption and high efficiency design
Low power coil technology is used to significantly reduce operating energy consumption, especially suitable for 24V DC power supply scenarios, and adapt to the long-term stable operation requirements of large-scale automated production lines.
Optimize the electromagnet and control circuit to reduce heat while maintaining fast response and improve energy efficiency.
Fast response and precise control
After the coil is energized, it can drive the valve core to move within milliseconds to meet high-frequency switching requirements (such as packaging machinery, logistics sorting systems).
Combined with direct-acting or pilot-operated structures, it ensures reliable opening and closing under zero or high pressure differentials, with high control accuracy.
High reliability and durability
The molded coil adopts dust-proof and moisture-proof packaging technology, with a lifespan of up to millions of operations, and supports operation in a wide temperature range of -10°C to 50°C.
The coil and valve body adopt a modular connection design, which can be quickly replaced to reduce downtime and maintenance time.
Environmental adaptability and safety protection
The shell material is corrosion-resistant and explosion-proof, suitable for scenes containing dust or corrosive gases such as chemical and metallurgical industries.
Some models support the combination of PTFE diaphragm and high-temperature coil, which can withstand environments above 120°C and adapt to special working conditions such as heat treatment equipment.
Precautions for use
Installation and wiring specifications
During installation, ensure that the coil is aligned with the valve body interface to avoid forced twisting and damage to the internal circuit; the wiring must strictly distinguish between positive and negative poles (such as red and blue lines corresponding to DC24V power supply).
Vertical installation requires heat dissipation space to avoid overheating of the coil; the working environment humidity must be ≤95% to prevent the insulation performance from deteriorating.
Power supply and medium management
The power supply voltage fluctuation must be controlled within ±10%. It is recommended to configure a voltage stabilizer to avoid voltage instability causing coil burning.
The gas source must be pre-processed through a 5μm precision filter to prevent rust and oil from entering the valve body and causing the coil to get stuck or wear.
Maintenance and Fault Prevention
Check the coil terminals for looseness every quarter and clean the surface oil; test the coil resistance every six months, and replace it if the deviation exceeds 15%.
The lubrication cycle needs to be shortened in high temperature scenarios. It is recommended to apply high temperature resistant grease to the valve core sliding part every 3 months.
Abnormal Handling and Safety Protection
When the coil is overheated or the power is off abnormally, the power supply must be cut off immediately and the load must be checked to see if it exceeds the limit; complex faults require the bypass system to maintain operation.
It is forbidden to disassemble the coil with power on in an explosion-proof environment. Explosion-proof tools must be used for maintenance and follow the safe operation procedures.
Through the above characteristics and specifications, the Aventics solenoid valve coil can significantly improve the control efficiency and stability of the pneumatic system, and is suitable for harsh industrial scenarios such as automobile manufacturing, food processing, and energy equipment.
| Fluid | Mineral Oil |
| Port Type | G1/4 |
| Type Of Connection | Subplate mounting |
| Color | Blue |
| Voltage | 24V DC |
| Material | Stainless Steel |
| Certifications | CE, UL, CSA |
| Max Temperature | 80°C |
| Protection Class | IP65 |
| Response Time | 0.5Second |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Product Tags:
|
|
AVENTICS 5420507022 Solenoid Valve Coil High Efficiency Design 100% New Original Images
|
